Product Overview
This trigger set includes a modified OEM trigger shoe with over travel adjustment screw (not externally visible) and safety mod for reduced pretravel (no pretravel reduction also availble as an option or upon request), OEM gen 3 tuned trigger bar, OEM gen 4 housing, 6 lb trigger spring, reduced power firing pin safety spring, and our patent pending enhanced minus connector tuned and fit to the trigger set. There is an optional finger relief safety mod that curves the safety for a flush fit to provide a better feel for some shooters.
The set comes in a drop-in configuration ready for your gunsmith to install. Installation and safety checks are provided with the kit. Typical installation is 5 to 10 minutes. Check out the install and safety check page to get an idea of what to expect.the trigger shoe and should be within half a pound.
This setup can be configured heavier (half to a full pound) by using combinations of your OEM trigger and safety plunger spring instead of the provided springs. See the configurations page for more details. If a heavier setup is desired in the drop-in configuration, specify pull weight in the order notes at checkout.
Currently in stock and ships within 3 to 5 business days. Orders placed 4/19/24 through 4/28/24 will ship starting 4/29/24.
Notes: The 9mm options listed exclude Glock 43/43x/48. Order 9mm/gen 5 for 19x, 45, and 47 models. Polymer80® frames have unique considerations and allow for greater pretravel reduction (select the P80 option). If ordering a gen 3 trigger for a Polymer80®, please let us know in the order notes as our standard gen 3 trigger isn't compatible and will use our grail pin instead of enhanced minus connector. Our gen 3, P80, and gen 5 triggers may use gen 4 housings optimized for each platform. Contact us for options for Timberwolf® frames and other models/generations not listed.
Disclaimer: This kit should be installed by a certified and knowledgeable gunsmith. Due to tolerance variations between guns, safety and reliability margins should be inspected during installation and periodically thereafter during maintenance. Proper trigger safety function should be verified after installation. Engagement of the trigger bar to firing pin should be inspected to verify greater than 2/3 coverage of the trigger bar interfacing surface. Although it is unlikely that installation of the parts in this kit will result in inadequate margins, a parts configuration should be used or adjustments should be performed to achieve necessary margins. Tactical Trigger, LLC assumes no liability for installation or use of this product.
DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that
this product is compatible with GLOCK pistols.
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK,
Inc. and is one of many trademarks registered by GLOCK, Inc. and GLOCK
Ges.m.b.H. Neither Tactical Trigger, LLC, nor this site are affiliated in any
manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK
Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the
sale of products compatible with GLOCK pistols, parts, or components. For
genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit
www.glock.com.
