Sig Sauer P365® Trigger Kit

(15 reviews) Write a Review
$100.00
Adding to cart… The item has been added

Product Overview

This trigger kit is designed for use with the stock internals and stock trigger of the P365® to maintain full safety and reliability and is compatible with all P365 variants (P365, P365 X, P365 XL, P365 SAS, P365-380, P365-XMACRO including manual safety variants). Included in this kit is everything necessary to tune all key aspects of trigger performance: pretravel (distance from start to wall), sear engagement (wall/break feel and wall to break/reset distance), overtravel (amount of extra travel after the break), and pull weight. In line with the P365 design, this kit is modular and each aspect can be addressed independently to achieve desired results. Using all parts provided in this kit, pull weight is reduced to 3.5 to 4# after break-in, total travel is reduced by half, pretravel is light and smooth into a hard defined wall, and wall to break/reset distance is reduced by less than half compared to the stock trigger producing unparalleled performance and feel. See video below for trigger performance overview.

This kit includes a pretravel stop with optional OEM modified slide cap for pretravel reduction, our patent pending Sear Control Springs for sear engagement adjustment, an overtravel stop to minimize overtravel, and a reduced power striker safety spring for pull weight reduction and lighter, smoother pretravel. A modified OEM manual safety lever is also available to provide compatibility when using this kit with manual safety models. The stainless steel pretravel stop is set to provide to maximum allowable pretravel reduction while maintaining full striker safety margin. The optional OEM modified slide cap allows for slide installation and removal without need for slide cap removal when using the pretravel stop. The user desired wall/break feel can be achieved by installing 1 of the 3 provided Sear Control Springs. The stainless steel overtravel stop comes fixed to reduce overtravel to a minimum while maintaining full reliability margins. The overtravel stop can also be permanently adjusted to provide increased overtravel if needed for the unique tolerances of your gun. This complete kit can be installed and margin checked for safety and reliability in as little as 5 min by a knowledgeable gunsmith. See installation video below for detailed installation and margin inspection procedures. For best break feel also consider purchasing our P365 OEM polished striker and/or polishing kit (listed seperately).

In stock and ships within 1 to 2 business days. Installation service is also available for $100 plus shipping costs through a local FFL that we have trained and certifed. Installation service is purchased independant of the website and a kit can also be purchased at the same time if preffered. Turn around time for installation is 2 to 3 business days once recieved. Contact us via email at [email protected] to set up an installation.

Disclaimer: This kit should be installed by a certified and knowledgeable gunsmith. Due to tolerance variations between guns, safety and reliability margins should be inspected during installation and periodically thereafter during maintenance. Striker safety margin should be inspected to verify greater than 1/8 inch pretravel is present before the striker safety is defeated. Engagement of the sear to striker should be inspected to verify greater than full coverage of the sear interfacing surface. Although it is unlikely one or more Sear Control Springs provided in this kit will result in less than full sear coverage, a Sear Control Spring that provides greater than full coverage should be used in order to maintain full reliability. Tactical Trigger, LLC assumes no liability for installation or use of this product. 

 
 
 
 
 
View this post on Instagram
 
 
 
 
 
 
 
 
 
 
 

A post shared by Tactical Trigger, LLC (@tacticaltrigger)

Short install video:

 

Detailed installation video:

 
Reviews:
 

Reviews

(15 reviews) Write a Review

15 Reviews Hide Reviews Show Reviews

  • 5
    Does what it say it will do.

    Posted by Anthony on 11th Aug 2022

    Easy install, and takes out a lot of the factory slop without feeling too tight for defensive use. I think it strikes a good balance, as nobody is bullseye shooting with a p365. I put the #1 spring in it just to check it out and it was super crisp but I felt it was a little too short for CCW use. The #3 has a bit of a rolling break but you really can't tell unless dry firing. Trigger pull was reduced a little over 1 lb on my fairly new pistol, and I expect it to get lighter and cleaner with break in. Overall it's a great kit. It's fairly expensive for what it is, but they really don't have economy of scale on their side and I am sure they spent a long time and money on R&D and tooling.

  • 5
    P365 trigger kit

    Posted by Nick on 25th Jun 2022

    Best value you could ask for, does what it says. Great instructions and great support.

  • 5
    Awesome product!!

    Posted by William Barber on 30th Mar 2022

    Works as advertised. You are doing yourself a disservice if you do not try this product.

  • 5
    Sig Sauer P365 Trigger Kit

    Posted by Hector Melendez on 29th Mar 2022

    Definitely the best upgrade for the trigger! Very highly recommended! This upgrade trigger kit does exactly as is promises. I combined this kit with the Armory Craft skeletonized slightly curve trigger and the Tactical Trigger Polished Striker. Much improved, shorter pre-travel, lower wall and crisp/light reset, shorter over-travel, lower pull weight. WOW! What a improvement!

  • 5
    Super happy

    Posted by John Bailey on 6th Feb 2022

    I combined this kit with an Armory Cradt flat trigger. I could not be happier. It completely changes the game the pre travel or take up and reset are significantly improved. I can't say enough good things about it.

  • 5
    Worth EVERY penny…!!

    Posted by Lang White on 26th Jan 2022

    I’m amazed at the difference this trigger kit made… short wall, crisp LIGHT break…. SHORT & crisp /light reset… tightest grouping I’ve ever had… fast follow Ups stay on target… LOVE this trigger… made me a better, more consistent shooter… THANK UOU…!!

  • 5
    P365XL trigger kit upgrade and Polished striker

    Posted by Jeff Horne on 23rd Dec 2021

    I shot my P365XL today with the upgraded trigger. Wow, awesome. It's shorter, lighter, and more precise and predictable now. Clear wall and crisp trigger. I shot much better. I also installed the polished striker.

  • 5
    Sig P365 XL Install

    Posted by Joe Duch on 21st Dec 2021

    The kit was fairly easy to install on my P365 XL with the exception of the Sear Control Spring. I chose to use the #1 spring and it was a bit tricky to get the safety lever pin to thread thru it. I left all the layers on both the pretravel reduction and overtravel stop pieces. I also got the OEM modified slide cap which performed as stated. Result: Much shorter trigger pull and reset. Measured trigger pull went from 4lb. 13oz. down to 3lb. 9oz. after install. So, overall this kit is worth every penny in my opinion and I'm very satisfied with the results.

  • 5
    P365 trigger kit

    Posted by Dave Koedel on 26th Nov 2021

    Awesome kit, dramatic improvement on pre-travel, over-travel, and pull!