Product Overview
This is the pretravel stop from our full P365 trigger kit available as a replacement or for use alone. The pretravel stop is minimally adjustable by removal of one layer to accomodate tolerances differences between FCUs and different triggers. It is intended for use with stock Sig Sauer curved or flat triggers to minimize take-up while still maintaining full striker safety margins. This part does not eliminate mush/creep in the break (See our patented Sear Contol Springs or full kit if this is desired). It is not recommend to use the pretravel stop without our sear control spring since little if any noticable take-up to the wall will remain which tends to less desirable for most shooters trained to stage and shoot from the wall (as well as the long mush/creep left in the pull from wall to break without a properly selected sear control spring). See pictures below for a visual of the different types of travel reduction provided from each part of our full kit and how the pretravel stop relates.
It is not recommended to purchase the pretravel stop alone as it is intended to be used with a modified slide cap which is available as an add on when purchasing. With the pretravel stop installed, the internal safety lever is kick up slightly which interferes with the stock slide cap when installing or taking down the slide. The modified slide cap allows for clearance so the slide can be installed or taken down as normal without any special considerations.
See our full kit for installation videos.
In stock and ships within 1 to 2 business days.
Disclaimer: Due to tolerance variations between guns, safety and reliability margins should be inspected during installation and periodically thereafter during maintenance. Striker safety margin should be inspected to verify greater than 1/8 inch travel is present before the striker safety is defeated. Tactical Trigger, LLC assumes no liability for installation or use of this product.
